Sunday, December 25, 2011
Spark plug replacement procedure 2003 A6 DIY Guide
This is a super easy project, which will make you feel like you've done you a favor by keeping your money in your wallet when alighting from a simple skill. From the beginning to the end should take in the time-a maximum of two-beer (if you're not thirsty). This was done on my 2003 A6 2.7 T know that the previous years had been winding packets were bolted on. Not sure what other differences exist. Gather your documents. For this task, we're going to use a flat head screwdriver head and phillips, a chestnut flex-handle 3/8 inch to 18 ?. Using a phillips screwdriver head, remove the two screws on top with air/scoop. When I remove the screws, pull forward to scoop. After removing the scoop, remove plastic neck by pulling the edge closest to the airbox (end will release easily from one clip), and then pushed to the back of the neck and upwards. Open the clips holding the pipes above the airbox. There are two of them. To remove the wiring of the clip at the top, fender side of the airbox. This guide contains step-by-step procedures integrated with visualization.
Download
No comments:
Post a Comment