Manual Raeder

Installation instructions short Shifter Acura TSX. Thank you for purchasing the Comptech kit short Shift 6-speed for the Acura TSX. All components are designed and manufactured using the latest in technology and materials. Please take a moment to read this page of warranty and instruction manual carefully before starting any work. Always work in a clean environment and use the appropriate safety equipment and tools to avoid possible damage or injury. Comptech recommends using a genuine Honda Service Manual supplement these instructions. Every Comptech's products are intended to be installed by a professional installer.

Many stock parts are reused during installation. Not to damage or drop any parts during disassembly or installation. We recommend that any markup or wire hose before shutting down, to avoid confusion during reassembly.Remove (4) screws 8 x 1.25 mm shifter console (J).

Acura oil life Monitor User Manual reset procedures. To reset the service reminder messages to Acura vehicles, carry out the following procedure: 1. turn the ignition key no. 2. Select the trip A or B on your trip odometer (one may be used). 3. repeatedly press the button until the oil life display. 4. press and hold the Select/Reset button for 10 seconds.

Multi Information Display requires a confirmation. 5. Press the Select/Reset button for 10 seconds to confirm.Lube oil National News has compiled this list of oil life indicator reset procedures for owners manuals and other technical documents. These are only superficial explanations, and the procedure may not work for all vehicle types listed under what they do. For more information, see the vehicle

The original design timing belt tensioner is filled with oil to dampen oscillation.The AERATechnical Committee offers the following information regarding a revised timing belt tensioner for 2002-2003 Acura 3.2Lengines. This tensioner is part of a product improvement by Acura. Vehicles with the revised tensioner should be identified by a punched mark above the sixth digit of engine compartment VIN Code as shown in Figure 1 below.

The original design timing belt tensioner is filled with oil to dampen oscillation. Due to a manufacturing situation, the tensioner oil can leak. If enough oil is lost, the timing belt loosens and causes engine noise. The worse case scenario is the belt may lose tension and allow loss of cam timing. Refer to chart below to determine which vehicles are affected. 2002 3.2TL: From VIN 19UUA5…2A052043 thru 19UUA5…2A061706

get here Revised Timing Belt Tensioner 2002-2003 Acura 3.2LSOHC Engines

Jet Map Information Edelbrock engineering has conducted dyno testing with the 2002-Later Acura RSX Performer Nitrous System to ensure the horsepower increase provided by the nitrous system is as intended. On a typically stock 2.0L engine, you can expect the following approximate power gain: Nitrous / Fuel Jetting Approx. HP Gains .024 .018 40 .032 .020 70 The dyno tests were conducted at Edelbrock using a stock 2002 Acura RSX Type S. These tests were conducted with 950 psi nitrous bottle pressure. 1.3Engine Operation Considerations When used correctly, nitrous oxide safely elevates cylinder pressures and temperatures while increasing combustion rate. These characteristics make the engine more sensitive to detonation.

To ensure proper performance, engine and drive line life, the following tips are suggested: System Jetting Never exceed the recommended jetting!! Excessive jetting will result in severe engine damage. Fuel Quality Because Nitrous oxide is an oxidizer, fuel selection is critical. Both octane and fuel consistency affect fuel burn rate. The oxidizer quality of nitrous oxide will accelerate the burn rate, so we recommend a high quality of gasoline. We also recommend you use the same grade of gasoline every time you use your nitrous oxide system. This will help maintain the same fuel burn rate every time. Ignition Components Most aftermarket performance chips increase the vehicle’s ignition timing, which can cause detonation with the use of nitrous oxide.

get here Edelbrock Nitrous Oxide Injection System Installation Manual

"The sound quality of the ELS Surround audio system in the new Acura TL is just remarkable," said Dan Bonawitz, Vice President corporate planning and logistics, Acura. "Working with Elliot Scheiner and is based on his extensive experience in the music industry led an audio system that is a chord with every strike, enjoys music. We are really excited to offer as standard the first vehicle manufacturer, DVD-audio and surround ELS."

Discussion on the system, said Safi: "with the ELS Surround audio system, we can finally recorded and reproduce music as we to hear it in the Studio." And if it is a factory-installed sound system, DVD-audio, surround sound to the one of the best ways to the system of the vehicle specific acoustic environment can be optimized to enjoy multi-channel music because you're dealing with a defined hearing room where.
get ELS marks surround system debuts in 2004 Acura TL

this installation manual for download in color: www.twmperformance.com 6 remove both screws secure the shift Assembly to the bottom of the case with a 12 mm socket and ratchet. 7 Remove the screw at the end of the shift rod with 12 mm or 14 mm (depending on model) socket and ratchet gear. May be necessary, wrench use it a 12 or 14 mm if space is limited. 8. Remove shift Assembly and Shift Rod out of the car. It may be necessary is the bracket to remove exhaust rubber to enough memory for the shifter and shift rod.
-4 - This installation manual is for download in color: www.twmperformance.com 9. This is the shift Assembly after it has been removed from the vehicle. 10. Remove the 2 screws holding the switch Assembly together with a 10 mm socket and ratchet. You may need to use Vice grips to secure from the top remove the screws the nut on the underside of the Assembly successfully. 11. Remove lever and plate from the bar once both screws are removed.
-5 - This installation guide is available for downloading in color at: www.twmperformance.com 12 remove you dust rubber boot around the main pivot ball shift lever. Old grease and dirt or debris which may clean the shop or a clean cloth into the boat with a towel.

Link Buchen Sie 1.6 Acura EL 1990-1993 Acura Integra TW

Audi A6 is a good car with the best machine settings. If you want to know about Acura TSX car you can read this ebook. This is to review the contents of a PDF:

1 STEP #1 • Loosen lock nut (A) to remove shift knob (B). Parts List: • Short Shifter • (2) Set Screws • 680 Loctite • Bushing Removal Tool Short Shifter Acura TSX Installation … … Instructions(6 speed only) INS-126 2.2.2006 VERSION: 4717 GOLDEN FOOTHILL BLVD • EL DORADO HILLS, CA 95762 • 916.933.1080 • FAX 916.939.9196 • www.comptechusa.com • M-F 8:00 AM—5:00 PM PST Thank you for purchasing the Comptech Short Shift kit for the 6-speed Acura TSX. All components have been designed and manufactured …
2 STEP #3 • Remove upper center pocket (A). • Open lid, pull at lower edge of case portion of pocket back by hand, to detach clips. Do not pull lid portion while removing upper center pocket. Once loose, close lid and remove. • Disconnect pocket light bulb socket (B) and detach harness clips (C). STEP #4 • Remove screws, disconnect front accessory power socket connector (D) and detach harness clip (E), then remove lower center pocket (F). STEP # 5 • Open console box lid (A) and remove console mat (B) and screws (C,D). D E F E F G H STEP # 6 • Lift and remove center console (E). • Disconnect rear accessory power socket connector (F), and detach clip (G). • Pull up rear portion of console to release hooks (H), then remove.

Download Short Shifter Acura TSX Installation Instructions get here

2002-2003 Acura 3.2 L SOHC engines revised timing belt tensioner Manual. AERA Technical Committee offers the following information about a revised timing belt tensioner for 2002-2003 Acura 3.2 L engines. This tensioner is part of a product improvement Acura. Vehicles with the revised tensioner should be identified by a punched mark above the sixth digit of the VIN code, as shown in Figure 1 below the engine compartment. The original belt tensioner design is filled with oil to cushion the oscillation. Due to a production situation, can pour the oil tensioner.

Download: 2002-2003 Acura 3.2 L SOHC engines revised timing belt tensioner Manual

1996-2001 Honda Acura Integra Type R Edelbrock 65mm Throttle Body INSTALLATION INSTRUCTIONS. benefits when re-using the factory intake manifold, you should match the opening on the intake manifold to the size of the new throttle body bore. The manifold should be port-matched OFF the engine and thoroughly cleaned prior to re-installation. If using Edelbrock Victor X PN 4764 or 4765, no grinding is needed.

These manifolds are already bore-matched to this throttle body. Refer to the OEM owner’s manual for removal/installation procedure of the intake manifold. Use the gasket as a template to mark the manifold for grinding. 8. Be certain the throttle body flange surface on the intake manifold is clean and free of debris. Using the factory nuts and bolts and the new gasket supplied in the kit, attach the throttle body to the intake manifold.

download from here

Be certain the gasket-mating surface on the intake manifold is clean and free of debris. Using the factory nuts and bolts and the new gasket supplied in the kit, attach the throttle body to the intake manifold. Torque nuts and bolts down to 20 N·m or 14 lbf·/ft. 10. Slip the throttle cable on the linkage arm. 11. Observe the throttle body while an assistant presses and releases the gas pedal to ensure that the throttle blade opens and closes completely as well as smoothly. 12. Re-attach the air filter duct, all vacuum hoses, coolant hoses and electrical connectors on the new throttle body. 13. Re-connect the negative battery terminal. 14. Start the engine and check for loose connections or coolant/vacuum leaks, etc. 15. After the engine is warmed up, check the idle speed (refer to owners manual).

Use these links (and links throughout this manual) to navigate through this reference. For a printed owner’s manual, click on authorized manuals. Congratulations! Your selection of a 2002 Acura RSX was a wise investment. It will give you years of driving pleasure. One of the best ways to enhance the enjoyment of your new Acura is to read this manual. In it, you will learn how to operate its driving controls and convenience items. Afterwards, keep this owner’s manual in your car so you can refer to it at any time.Maintaining your car according to the schedules

2007 Acura RDX Owner’s Manual. Congratulations! Your selection of a 2007 Acura RDX was a wise investment. It will give you years of driving pleasure. One of the best ways to enhance the enjoyment of your new vehicle is to read this manual. In it, you will learn how to operate its driving controls and convenience items. Afterwards, keep this owner’s manual in your vehicle so you can refer to it at any time. Several warranties protect your new vehicle. Read the warranty bookletn thoroughly so you understand the coverages and are aware of your rights and responsibilities. As you read this manual, you will find information that is preceded by a symbol. This information is intended to help you avoid damage to your vehicle, other property, or the environment. Congratulations! Your selection of a 2007 Acura